A wall saw is a professional power tool designed for cutting concrete, brick, stone, and reinforced concrete walls, widely used in building renovation, road construction, bridge demolition, and underground engineering. The hydraulic wall saw is heavy-duty, with strong cutting power, ideal for large-scale outdoor projects (bridge cutting, reinforced concrete wall demolition) and complex cutting tasks. Features high-quality diamond saw blades, precise cutting control and durable structures, making wall saw cutting efficient, safe and neat. As a reliable concrete wall saw for sale, YG’s products are trusted by construction teams, renovation companies and engineering contractors worldwide. If you are interested, please contact YG immediately for more information.
Hydraulic Wall Saw Power Station Parameters
| Model | YG-600TM | YG-700TM | YG-600RV |
| Maximum power | 25Kw | 30Kw | 25Kw |
| Motor cooling method | Air cooling | Water cooling | Air cooling |
| Rated voltage | 380V, 50Hz | 380V-420V, 50Hz-60Hz | 380V/400V, 3-phase, 50Hz |
| Pressure stages | 3 | 3 | 3 |
| Max. Operating pressure | 200bar/20Mpa | 210bar/21Mpa | 200bar/20Mpa |
| Oil flow rate | 30-80L/min | 40-100L/min | 30-80L/min |
| Dimension | 600*650*1050mm | 500*520*1100mm | 650*600*1000mm |
| Weight | 220kg | 140kg | 210kg |
6 Core Advantages of Hydraulic Wall Saw
1. Strong Cutting Power & High Efficiency
YG hydraulic wall saw delivers powerful cutting force, easily cutting through 600mm-thick reinforced concrete walls, with a cutting speed of 30-50cm/min—2-3 times faster than ordinary wall saws. The electric wall saw is optimized for small cuts, with stable power and smooth cutting, perfect for precise indoor operations. Both models use diamond saw blades that stay sharp for long periods, reducing blade replacement frequency.
2. Precise & Neat Cutting Effect
Equipped with adjustable cutting depth and angle controls, YG wall saws ensure straight, smooth cuts with no chipping or cracking on the wall surface. The saw blade runs stably with minimal vibration, avoiding uneven cuts and reducing post-cut polishing work—saving time and labor costs for follow-up projects.
3. Safe & User-Friendly Operation
All YG wall saws are equipped with safety protection devices: emergency stop buttons, blade guards and overload protection systems, preventing accidents during wall saw cutting. The control panel is simple and intuitive, with clear buttons and digital displays for cutting speed and depth, allowing workers to master operation in just 1-2 days. The machines are also designed with ergonomic handles to reduce operator fatigue during long hours of work.
4. Durable Quality & Long Service Life
Made of high-strength steel and wear-resistant components, the YG hydraulic wall saw has a service life of over 8,000 working hours. The diamond saw blades are heat-resistant and wear-resistant, and the machine’s sealed structure prevents dust and debris from entering the internal system, reducing failure rates and maintenance costs.
5. Wide Application & Strong Adaptability
YG wall saws are suitable for various materials (concrete, brick, stone, reinforced concrete) and cutting scenarios: indoor wall openings, outdoor bridge cutting, road expansion, underground pipe laying, and building demolition. The hydraulic wall saw can work in harsh outdoor environments (high temperature, dust), while the electric wall saw is ideal for indoor use with strict noise and emission requirements.
6. Cost-Effective & Competitive Pricing
As a direct factory-sold concrete wall saw for sale, YG cuts out middlemen, offering competitive prices that are 25-30% lower than market averages. The machines have low energy consumption and minimal maintenance needs, reducing long-term operating costs for customers. We also offer flexible customization (saw blade size, cutting depth) to meet specific project requirements.
Benefits of Choosing YG Hydraulic Wall Saw
- Cutting performance: YG hydraulic wall saw and electric wall saw effortlessly cut thick and hard materials, delivering precise cutting effects with low vibration.
- Safety & operation: Equipped with complete safety protection parts, simple to operate even for workers without professional experience.
- Service life: Durable structure that supports long-term, continuous working. Global after-sales service: Provide worldwide technical support, free operation training, and quick spare parts delivery for remote regions.
- Price advantage: Competitive rates for concrete wall saws for sale, with zero hidden charges.
- Customized solutions: Tailored equipment schemes matching all wall saw cutting working conditions, bringing outstanding cost performance to all buyers.
5 Important Usage Precautions for YG Wall Saw
1. Pre-Operation Preparation
- Before wall saw cutting, inspect the machine thoroughly: check the saw blade for wear or damage (replace if needed), ensure the hydraulic oil/electric power supply is sufficient, and verify all safety devices are working properly.
- Prepare the cutting site: clear debris and obstacles around the wall, mark the cutting line accurately with a marker, and ensure the site is well-ventilated (especially for indoor cutting to avoid dust accumulation).
- Wear full safety gear: operators must wear a helmet, goggles, dust mask, heat-resistant gloves and non-slip shoes to protect against dust, flying debris and accidental cuts.
2. Correct Operation Steps
- Install the saw blade correctly according to the cutting material (diamond blades for concrete/reinforced concrete), ensuring it is tightly fixed and runs smoothly.
- Adjust the cutting depth and angle according to the project requirements—start with a small depth and increase gradually to avoid overloading the machine.
- Start the machine and let it run idle for 1-2 minutes to check for abnormal noise or vibration; begin cutting at a slow speed, then increase speed gradually as the blade penetrates the material.
- Keep the saw blade cool during cutting: use water cooling (most YG wall saws have built-in water systems) to prevent overheating and extend blade life; avoid dry cutting, which can damage the blade and machine.
3. Safety & Site Precautions
- Never stand in front of the saw blade or touch the rotating blade with hands or tools—even if the machine is turned off, wait for the blade to stop completely before checking.
- Avoid cutting near electrical wires, water pipes or other hidden structures; if unsure, use a detector to check the wall interior first to prevent accidents.
- Do not operate the machine in wet or slippery conditions (for the electric wall saw) to avoid electric shock; ensure the power cord is not damaged or tangled during work.
- Keep irrelevant personnel (especially children) away from the cutting site, and set up warning signs to prevent accidental entry.
4. Post-Operation Maintenance
- After wall saw cutting, turn off the machine and wait for the saw blade to stop completely; clean the machine, saw blade, and water system with clean water to remove dust and debris.
- Inspect the saw blade for wear, and clean or replace it if necessary; check the hydraulic oil level (for the hydraulic wall saw) or power cord (for the electric wall saw) for damage.
- Lubricate the machine’s moving parts (bearings, gears) to reduce friction and wear; tighten any loose screws or bolts to ensure the machine is stable.
- Store the machine in a dry, covered area to avoid rain, dust and corrosion; for long-term storage, remove the saw blade and apply anti-rust oil to the machine surface.
5. Regular Maintenance
- Conduct a comprehensive inspection every 50 hours of operation: check the hydraulic system, electric components, saw blade, and safety devices for faults.
- Replace hydraulic oil (for hydraulic wall saw) every 500 hours, and change the oil filter at the same time to ensure the system runs smoothly.
- Follow the operation manual for regular maintenance, and contact YG’s technical team if any abnormal conditions occur (e.g., unusual noise, poor cutting effect).
Hydraulic Wall Saw For Sale-Choose YG Manufacturer
YG’s hydraulic wall saw is a high-quality, efficient and safe concrete wall saw for sale that perfectly meets the needs of various wall saw cutting projects—from small indoor renovations to large outdoor engineering demolitions. With strong cutting power, precise operation, durable quality and competitive pricing, YG wall saws solve the core pain points of construction teams: low cutting efficiency, poor cutting quality, high safety risks and high maintenance costs.
We understand the concerns of every buyer, from cutting performance and safety to after-sales support, and we’ve optimized our products and services to address all these issues. YG provides free operation training, a 1-year free warranty, global spare parts supply and 24/7 remote technical support, ensuring every customer can use our equipment with confidence. Whether you’re a small renovation company, a large construction team or an engineering contractor, YG has the right wall saw for your project. Investing in a YG hydraulic wall saw or electric wall saw will not only improve your wall saw cutting efficiency and quality but also reduce operating costs and safety risks.
If you’re looking for reliable, cost-effective concrete wall saw for sale or need professional advice on choosing the right model, contact YG Machinery today!
